Wulf Mods TRYP Mushroom Shaped Variable Voltage Battery

Take A Little TRYP

Looking for a vaporizer that is not just fun, but also a fungi? We have you covered with the Wulf Mods TRYP Mushroom Shaped Variable Voltage Battery! The TRYP is a one-of-a-kind 510 threaded battery with a classic toadstool inspired look and a soft silicon body that feels great in the hand. With a selection of 4 different temperature settings (2.8, 3.2, 3.6, 4.2v) for varied experience, 500mAh battery, and a 12s preheat for those extra special occasions, the TRYP is able to handle anything you throw its way.

Keep your sessions rolling smoothly with the TRYP thanks to its easy to read digital screen providing battery levels and current voltage settings. Take a look at the 9 different spatter color options and choose your favorite to start your Wulf Mods TRYP adventures today!

Loading the TRYP

To load your TRYP all you have to do is choose a 510 threaded cartridge and then gently screw it into the connection port located on the top of your battery. Always make sure that the threads are 100% connected before starting your session.

Using Your TRYP

Get started vaping with your TRYP by pressing the power button 5x in a row. This will turn on your device and get you all ready to vape. Whenever you are finished for the time being, just press the power button another 5x in a row and your TRYP will switch off.

Adjusting The Temperature On Your TRYP

To change between the 4 different temperature settings on your TRYP, you must press the power button 3x in a row. This will cause the device to switch to the next temperature level and can be repeated to cycle through all of the available choices.

Pre-Heating Your TRYP

For an added boost of power press the power button on your TRYP 2x in a row to activate the preheat functionality. When correctly input your TRYP will begin heating for 12s, after which you can use your device like normal for a special pre-heated cloud.

Charging the TRYP

To charge your TRYP make use of the USB-C port located on the side. When you plug your device in, your digital screen will start flashing your current battery % level. Once the level reaches 99% your vape will stop flashing to indicate that its done charging and should be unplugged.

Troubleshooting Your TRYP

In order to get the most out of your TRYP, you should be aware of the following troubleshooting errors that can arise when your vaporizer is trying to tell you something.

• Safety Cutoff: Your device will flash red 3x and turn off should you hold down the power button for longer than 15s at a time. To fix, release the power button and simply press it again to resume your vaping.
• No Load: Your device will flash red 2x if the cartridge is not properly connected to your device. To fix this, try removing your cartridge and screwing it back in and ensuring it is 100% connected.
• Short Circuit: Your device will flash 5x to indicate a short circuit warning, cease using your device until the warning goes away.
• Low Battery: The digital screen on your device will flash 3x and turn off when your TRYP is out of battery. This is to let you know it’s time for a charge.
• Open Circuit: Your device will flash red 2x to indicate an open circuit warning. Please remove your cartridge and screw it in again.

How to Clean Your TRYP

Keep your TRYP Battery operating at full capacity by making sure it is always clean. To do this power off your device and remove the cartridge from the 510 connection. From here you can take a q-tip or swab dampened with isopropyl alcohol to clean off the connection and ensure no materials have leaked into it. Once done, always leave ample time for your device to dry 100% before attempting to use it again.

What’s Included:

• (1) Wulf Mods TRYP Mushroom Shaped Variable Voltage Battery

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.